Register

Join our community and start to advertise your VoIP services right now. It's absolutely free!

Page 2 of 62 FirstFirst 12341252 ... LastLast
Results 11 to 20 of 611
  1. #11

    Quintum Tenor AFE400 4 Port VoIP Enterrprise Gateway - 501-1203-00

    CallTermination.com is sponsored by:



    - Video (HD), Chat/Group Chat App
    - WhiteLabel & Branded Mobile Dialer
    - Hybrid Dialer (VoIP & CallingCard App)
    - VoIP Softswitch & Calling Card
    - Retail & Wholesale VoIP
    - VoIP Billing & Callshop
    - IPPBX & CallCenter Solution
    - SIP Trunking Solutions

    AdoreInfotech.com
    - The Tenor VoIP MultiPath Switch Offers a Robust VoIP Switching Solution For Remote Offices and SOHO Environments
    Quintum’s Tenor switching/gateway solutions are deployed worldwide to provide highly reliable, easy-to-implement VoIP connectivity in a full range of enterprise and service provider environments. These highly adaptable solutions work with traditional PBXs, legacy analog equipment, IP PBXs and IP phones, IVR and ACD systems, RADIUS servers, and other critical components of end-to-end H.323- and SIP-based communications environments. They are perfect for deploying VoIP in small enterprises, SOHO or remote offices of larger enterprises, where analog and modem-based devices are common.
    Tenor AFE 400 4 Port VoIP Enterrprise Gateway – Four channel VoIP Station Gateway with 4 analog FXS ports and 2 FXO PSTN PORTS and one 10/100 Ethernet port. Intended for deployment of Enterprise VoIP services. Supports a network of up to four Tenor switches without a gatekeeper. Supports up to 4 simultaneous voice calls over the IP network.
    Features

    • 2, 4, 6 or 8 Analog line and trunk interfaces
    • Up to 8 simultaneous VoIP calls
    • Available in MultiPath or Gateway configurations
    • Perfect for small enterprises, SOHO and branch office locations
    • Support for external Quintum Tenor Monitor
    • Support for external Remote Management Session Server*
    • CALL MANAGEMENT FEATURES
    • Automatic call type detection: Voice/Modem/Fax
    • Answer and Disconnect Supervision
    • Trunk group support
    • Public and private dial plan support
    • User programmable dial plan support
    • Forced IP routing and IP port mapping
    • Pass-through support for calls to Toll-free, local and special service numbers (ie. emergency services, etc.)
    • Automatic appending and stripping of digits to dialed numbers
    • Call Detail Records
    • Least Cost Routing with external Quintum VoIP Call Routing Server*
    • Type 1 Caller ID/Name Support (Telcordia, ETSI, NTT and DTMF)

    Telephony Specifications

    • Voice algorithms: G.723.1a, G.729ab, G.711
    • Auto codec negotiation
    • Fax support: Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps, using industry standard T.38; Super G3 compatible up to 33.6 Kbps
    • Modem over IP
    • Choice of 2, 4, 6 or 8 FXS and/or FXO configurations
    • Standard RJ-11 connectors
    • Coding: A law, µ law
    • Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize
    • Loop Start, Reverse Battery, Battery Disconnect
    • Tandem/TDM Switching
    • Maximum Call Rate: 900 calls/hour
    • IP Network Specifications
    • LAN Interface: Fast Ethernet port (10/100 Base-T)
    • Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connections
    • DHCP Client
    • QoS Support: IP TOS, DiffServ
    • VoIP Network Specifications
    • SIP User Agent (RFC3261 compliant endpoint)
    • SIP RFC2833 for DTMF signaling
    • SIP Supplementary Services
    • Message Waiting Indicator
    • SIP Refer Method support
    • Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)
    • Adaptive Jitter Buffer
    • Packet Loss Compensation
    • NATAccess™
    • Security: IP Filtering
    • Up to 8 simultaneous VoIP calls
    • Support for DNS Addressing
    • Configuration / Management
    • Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors.
    • Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring
    • SNMPv2 Agent
    • Command Line Interface

    GENERAL SPECIFICATIONS

    • Dimensions: 1U High Chassis
    • W 8 1/4″ x H 2″ x D 7″
    • W 21cm x H 5.1cm x D 18.73cm
    • Maximum weight: 1.3 lbs. (0.6kg)
    • AC Power: 100-240 Volts AC, 50/60 Hz, 22 watts
    • Operating temperature: 40° – 104° F (5° – 40° C)
    • Operating humidity: 20% – 80% non-condensing
    • Telco: FCC Part 68, AS/ACIF S003, CS03, JATE AS/ACIFS002:2001
    • EMC: FCC Part 15 Class B, EN55022, EN55024, EN61000-2-3, EN61000-3-3, AS/NZS3260
    • Safety: UL60950, EN60950, AS/NZS60950

    - http://telea2z.com/quintum-tenor-afe...1-1203-00.html

  2. #12

    Quintum Tenor AXM2400 24 Port FXS/FXO VoIP MultiPath Switch with 24 VoIP Channels - 501-1139-SG

    - A more intelligent way to implement VoIP
    The Quintum® Tenor® AX Series gives businesses with analog voice infrastructures an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, and intelligent call routing, and supports QoS all in one solution. With its MultiPath architecture, the Tenor connects to the data network through a 10/100 Ethernet interface, the voice network through either a PBX or phone, and the public switched telephone network.
    Tenor AXM2400 24 Port FXS/FXO VoIP MultiPath Switch with Twenty Four VoIP Channels – Survivable Gateway – Switches provide local IP endpoint registration and call routing functionality in the event that communication with the central proxy is lost.
    Features

    • 8, 16, 24 or 48 Analog line and trunk interfaces
    • Up to 48 simultaneous VoIP calls
    • Available in MultiPath or Gateway configurations
    • Support for external Quintum Call Routing Server*
    • Support for external Quintum Tenor Monitor
    • Support for external Remote Management Session Server*
    • Transparent MultiPath Call Routing
    • Answer and Disconnect Supervision
    • IVR/RADIUS AAA compliant (Multilingual IVR)
    • CALL MANAGEMENT FEATURES
    • Automatic call type detection: Voice/Modem/Fax
    • Answer and Disconnect Supervision
    • Trunk group support
    • Public and private dial plan support
    • User programmable dial plan support
    • Forced IP routing and IP port mapping
    • Pass-through support for calls to Toll-Free, local and special service numbers (i.e., emergency services, etc.)
    • Automatic appending and stripping of digits to dialed numbers
    • Call Detail Records
    • Least cost routing with external Quintum VoIP Call Routing Server*
    • Type I Caller ID Name support (Telcordia, ETSI, NTT and DTMF)

    - http://telea2z.com/quintum-tenor-axm...1-1139-sg.html

  3. #13

    Quintum Tenor BX408 BRI VoIP Switch (Not S/W Upgradeable) - 501-1158-00

    - Tenor BX408 BRI VoIP Switch (Not S/W Upgradeable)Eight channel VoIP switch with four BRI S/T ports and one 10/100 Ethernet port. Includes the following features: VoIP Switch and MultiPath architecture — SelectNet QoS based autoswitching.Supports a network of up to four Tenor switches without a gatekeeper.Supports up to eight simultaneous voice calls over the IP network.
    The Quintum® Tenor® BX MultiPath Switch offers enterprises using ISDN Basic Rate Interface (BRI) lines an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates VoIP gateway functionality with its unique intelligent call routing, MultiPath architecture, and QoS support all in one solution.
    Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. BX Series products can support either 2, 4 or 8 BRI lines.
    Features

    • MultiPath and Gateway configurations
    • Available with 2, 4 or 8 BRI S/T ports
    • Up to 16 VoIP channels
    • Support for external Quintum Call Routing Server*
    • Support for external Quintum Tenor Monitor
    • Support for external Remote Management Session Server*
    • Intelligent Call Routing
    • IVR/Radius AAA Compliant (Multilingual IVR)
    • CALL MANAGEMENT FEATURES
    • Automatic call type detection: Voice/Modem/Fax
    • Trunk group support
    • Public and private dial plan support
    • User programmable dial plan support
    • Forced IP routing and IP port mapping
    • PSTN pass-through support for calls to toll-free, local, and special service numbers (emergency service, etc.)
    • Automatic appending and stripping of digits to dialed numbers
    • Call Detail Records
    • Least cost routing with external Quintum VoIP Call Routing Server*
    • Caller ID Name and Number

    - http://telea2z.com/quintum-tenor-bx4...1-1158-00.html

  4. #14

    Quintum Tenor DX2016 VoIP MultiPath Switch (Software Upgradeable) - 501-1114-00

    - Tenor DX2016 VoIP MultiPath Switch (Software Upgradeable) Sixteen channel VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet port. Includes the following features: MultiPath architecture — SelectNet QoS based autoswitching. Supports a network of up to four Tenor switches without a gatekeeper. Supports up to sixteen simultaneous voice calls over the IP network.
    The Quintum® Tenor® DX MultiPath Switch offers enterprises an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, intelligent call routing, and supports H.323 or SIP, and QoS all in one solution.
    Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. Product scales from a fractional T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath switch supporting 120 simultaneous VoIP calls.
    Features

    • Available with 2, 4, 6 or 8 T1/E1/PRI Spans
    • Up to 120 VoIP channels
    • Available in MultiPath or Gateway Configurations
    • Support for external Quintum Call Routing Server*
    • Support for external Quintum Tenor Monitor
    • Support for external Remote Management Session Server*
    • Intelligent Call Routing
    • VoIP and Tandem Circuit Switching
    • IVR/Radius AAA Compliant (Multilingual IVR)
    • CALL MANAGEMENT FEATURES
    • Automatic call type detection: Voice/Modem/Fax
    • Answer and Disconnect Supervision
    • Trunk group support
    • Public and private dial plan support
    • User programmable dial plan support
    • Forced routing
    • Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc.)
    • Automatic appending and stripping of digits to dialed numbers
    • Call Detail Records
    • Least Cost Routing with external Quintum VoIP Call Routing Server*

    - http://telea2z.com/quintum-tenor-dx2...1-1114-00.html

  5. #15

    Quintum Tenor DX2024 VoIP MultiPath Switch (Not Software Upgradeable) - 501-1115-SG

    - Tenor DX2024 VoIP MultiPath Switch (Software Upgradeable) Twenty four channel VoIP switch with two T1/E1/PRI ports and one 10/100 Ethernet port. Includes the following features: MultiPath architecture — SelectNet QoS based autoswitching.Supports a network of up to four Tenor switches without a gatekeeper.Supports up to twenty four simultaneous voice calls over the IP network. – Survivable Gateway
    Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. Service providers can deploy numerous VoIP applications such as SIP Trunking,Wholesale VoIP Termination, Calling Cards, Tandem Switching and Least Cost Routing. Product scales from a fractional T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath Switch supporting 120 simultaneous VoIP calls.
    Both versions of Tenor still include the features that made Quintum the VoIP market value leader.
    MultiPath architecture for easy integration with existing voice and data infrastructure, meaning little or no re-programming of the PBX, or upgrades are required and no need for special dialing plans.
    Transparent MultiPath Call Routing to intelligently route calls between the PBX, the PSTN, and the IP network to achieve the best combination of cost and quality. The Tenor can also route calls over IP to reduce costs, and then transparently “hop off” to the PSTN, to reach off-net locations.
    PacketSaver? Technology multiplexing to reduce bandwidth consumption by up to 57% by combining voice packets from multiple calls into a single packet.
    Universal Dial Plan that provides a programmable dial plan so Tenor to be integrated into any network environment.
    Auto Provisioning interface allows the Tenor solution to be deployed worldwide, and configured automatically by acquiring the configuration information from a central server, upon installation. The same auto-provisioning capability allows the Tenor to be configured from a VoIP application, thus supporting a single user interface between the VoIP application and the Tenor configuration.
    Unified Communications Proxy (UCP) provides ‘Any to Any’ connectivity: SIP-SIP, TDM-TDM and SIP-TDM, for easy integration with any network.
    NATAccess™ to allow Tenor to operate behind NAT firewalls to translate internal IP addresses into public addresses when a VoIP call is established with an outside party.
    Remote Management for anywhere, anytime remote management even behind NAT firewalls with Quintum’s Remote Management Session Server.
    Tenor and Tenor S now assure that VoIP can be deployed easily in existing voice and data networks, offering unmatched voice quality and survivability, network-wide scalability, and easy, secure remote management for installation, configuration, upgrades, troubleshooting and repair. All this adds up to lower TCO than any other VoIP solution on the market! Switch supporting 120 simultaneous VoIP calls.
    Features


    • Available with 2, 4, 6 or 8 T1/E1/PRI Spans
    • Up to 120 VoIP channels
    • Available in MultiPath or Gateway Configurations
    • Auto-Provisionable
    • Survivable
    • Unified Communications Proxy (UCP)
    • Supported by Remote Management Tools*
    • Perfect for enterprises and service providers deploying VoIP applications

    - http://telea2z.com/quintum-tenor-dx2...1-1115-sg.html

  6. #16

    Quintum Tenor DX4060 VoIP MultiPath Switch (Not Software Upgradeable) - 501-1118-00

    - Tenor DX4060 VoIP MultiPath Switch (Not Software Upgradeable) Sixty channel VoIP switch with four T1/E1/PRI ports and one 10/100 Ethernet port. Includes the following features: MultiPath architecture — SelectNet QoS based autoswitching. Supports a network of up to four Tenor switches without a gatekeeper. Supports up to sixty simultaneous voice calls over the IP network.
    The Quintum® Tenor® DX MultiPath Switch offers enterprises an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, intelligent call routing, and supports H.323 or SIP, and QoS all in one solution.
    Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. Product scales from a fractional T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath switch supporting 120 simultaneous VoIP calls.
    Features

    • Available with 2, 4, 6 or 8 T1/E1/PRI Spans
    • Up to 120 VoIP channels
    • Available in MultiPath or Gateway Configurations
    • Support for external Quintum Call Routing Server*
    • Support for external Quintum Tenor Monitor
    • Support for external Remote Management Session Server*
    • Intelligent Call Routing
    • VoIP and Tandem Circuit Switching
    • IVR/Radius AAA Compliant (Multilingual IVR)
    • CALL MANAGEMENT FEATURES
    • Automatic call type detection: Voice/Modem/Fax
    • Answer and Disconnect Supervision
    • Trunk group support
    • Public and private dial plan support
    • User programmable dial plan support
    • Forced routing
    • Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc.)
    • Automatic appending and stripping of digits to dialed numbers
    • Call Detail Records
    • Least Cost Routing with external Quintum VoIP Call Routing Server*

    - http://telea2z.com/quintum-tenor-dx4...1-1118-00.html

  7. #17

    Quintum Tenor DX8120 VoIP MultiPath Switch (Not Software Upgradeable) - 501-1120-00

    - Tenor DX8120 VoIP MultiPath Switch (Not Software Upgradeable) One hundred and twenty channel VoIP switch with eight T1/E1/PRI ports and one 10/100 Ethernet port. Includes the following features: MultiPath architecture — SelectNet QoS based autoswitching. Supports a network of up to four Tenor switches without a gatekeeper. Supports up to one hundred and twenty simultaneous voice calls over the IP network.
    The Quintum® Tenor® DX MultiPath Switch offers enterprises an easy, cost-effective way to capitalize on the power of Voice over IP (VoIP). The Tenor integrates a gateway, a gatekeeper, intelligent call routing, and supports H.323 or SIP, and QoS all in one solution.
    Enterprises can benefit from a variety of valuable applications such as PBX extension, remote office connectivity, long distance consolidation and call centers. Product scales from a fractional T1/E1, with 8 simultaneous VoIP channels up to a full 8 span MultiPath switch supporting 120 simultaneous VoIP calls.
    Features


    • Available with 2, 4, 6 or 8 T1/E1/PRI Spans
    • Up to 120 VoIP channels
    • Available in MultiPath or Gateway Configurations
    • Support for external Quintum Call Routing Server*
    • Support for external Quintum Tenor Monitor
    • Support for external Remote Management Session Server*
    • Intelligent Call Routing
    • VoIP and Tandem Circuit Switching
    • IVR/Radius AAA Compliant (Multilingual IVR)
    • CALL MANAGEMENT FEATURES
    • Automatic call type detection: Voice/Modem/Fax
    • Answer and Disconnect Supervision
    • Trunk group support
    • Public and private dial plan support
    • User programmable dial plan support
    • Forced routing
    • Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc.)
    • Automatic appending and stripping of digits to dialed numbers
    • Call Detail Records
    • Least Cost Routing with external Quintum VoIP Call Routing Server*

    - http://telea2z.com/quintum-tenor-dx8...1-1120-00.html

  8. #18

    CloudTC Glass IP Phone 1000

    - The CloudTC Glass 1000 is a touch screen six line multimedia VoIP phone which runs on the Android OS platform. This allows the Glass 1000 to deliver rich enterprise telephony capabilities, integration to your Outlook contacts and CRM systems and business applications through the thousands of available Android apps.
    CloudTC Glass 1000 Android VoIP Phone Overview:
    The elegantly simple and smart user interface of the CloudTC Glass 1000 provides easy access to advanced telephony features and business-focused applications. From looking up a contact, to conference calling, to browsing in the applications store, with the Glass 1000 it’s just one touch away.
    The Glass 1000 utilizes wideband speech codecs, which sample audio at 16 KHz instead of the standard 8 KHz, thus doubling the bandwidth for communications and significantly elevating voice quality. Combine HD audio with its acoustically tuned housing, and the end result is industry-leading speakerphone clarity.
    A key feature of the Glass 1000 Android VoIP phone is the ability for business users and third-party developers to add their own applications, either through company IT departments or by downloading from the thousands of available Android apps. Glass 1000 takes it a step further by offering the CloudTC App Market to download business-focused apps, the ones you actually want on your desk phone.
    It has never been easier to deploy a SIP based VoIP phone than with Glass 1000. From the initial set up and configuration to auto provisioning, the CloudTC Glass 1000 is designed to save your business time and money. With dual sensing switched Ethernet ports, your company can avoid additional wiring costs and leverage existing bandwidth to start taking greater advantage of your on premise or hosted VoIP services.
    Features


    • Up to 6 lines with call appearances
    • Large 8.9” (1024 x 600) Color Touch Screen LCD
    • Engaging graphical user interface and navigation menus
    • Built in CloudTC App Market
    • Instant Screen Sharing app
    • Integrated Salesforce calling app
    • Google Android 2.1 OS
    • Android WebKit based browser
    • One touch call transfer and conferencing
    • Call log with caller ID info
    • Call forward/Call transfer/Call timer
    • Do Not Disturb
    • Programmable Favorites List
    • HD Audio
    • Broadsoft and Metaswitch certified, Asterisk SIP interoperability
    • Android Market client software compatibility coming soon!

    - http://telea2z.com/cloudtc-glass-ip-phone-1000.html

  9. #19

    AudioCodes 310HD IP Phone

    - Includes 2nd Ethernet port for PC, 10 Programmable keys, 2×16 Character LCD display and Power over Ethernet (PoE. Power supply not included.
    The AudioCodes 310HD IP Phone meets a growing demand for High Definition VoIP solutions in end-user phones and terminals, improving the productivity and efficiency of business communications with new quality standards set by the High Definition voice technology.
    The 310HD IP Phone is the 1-line entry level IP Phone and includes a basic display and user interface.
    Complete Range of Phones
    The AudioCodes 300HD Series of High Definition IP Phones offers three phone models, which are well suited to the requirements of different types of business users. The 310HD is the 1-line, 2 concurrent calls per line entry level IP Phone and includes a basic display and user interface with multi language support. The 320HD is a 4-line, 2 concurrent calls per line premium model which includes a large Monochrome multi language graphic LCD display. The 350HD is a 6-line, 2 concurrent calls per line executive model with a large TFT color LCD display. All models support HDVoIP. The AudioCodes 300HD Series IP Phones are available with Power over Ethernet and/or external power supply.
    Cutting Edge Voice Quality & HD VoIP
    Based on AudioCodes’ advanced, robust and field-proven VoIPerfectHD™ software, AudioCodes’ IP Phones are designed to utilize the most popular wideband coders such as G.722, G.722.2 (WB-AMR) and Microsoft Real Time Audio (RTA). Each of these phones features enhanced proprietary capabilities, such as packet loss concealment, high quality wideband acoustic echo canceler, and low-delay adaptive jitter buffers to enrich the HDVoIP experience.
    Interoperability
    The AudioCodes 300HD Series of High Definition IP Phones is widely interoperable with IP-PBXs, Softswitches and IP Centrex Solutions. As Enterprises and Service Providers continue to seek open network architectures that enable them to maximize value and reduce costs, AudioCodes’ best-of-breed technology, wide interoperability, and adherence to standards make the 300HD Series of High Definition IP Phones a natural selection.
    Integration with VoIP Mobility
    The 300HD IP Phones can be combined with AudioCodes mobility solutions to enable a continuous access of end-users to high quality VoIP calling, wherever they are. In a business setting, AudioCodes MobilityPLUS solution lets employees take advantage of their Smartphone devices by installing a MobilityPLUS client on the Smartphones and configuring them as VoIP extensions of the business’ IP-PBX and UC system. In Cloud-based IP-Centrex environments, AudioCodes VMAS (Voice Mobile Access Solution) enables Service Providers to offer their end-customers attractive mobile VoIP calling plans and features. The VMAS client can be installed on existing Smartphones, conduct calls through Wi-Fi or cellular data connections, and reduce costly cellular voice minutes and roaming charges.
    - http://telea2z.com/audiocodes-310hd-ip-phone.html

  10. #20

    Aastra M9116 Analog Phone Charcoal

    - Aastra M 9116 Analog single line phone with call display, 8 programmable memory keys with power supply.
    Features


    • Single Line Analog Telephone
    • Call Display with Visual Call Waiting*
    • PBX Line or DC powered
    • Can enable or disable Speakerphone with mute
    • 8 programmable memory keys – for quick access to features*
    • Three line adjustable display with Contrast control
    • Callers List – stores name, number, date, and time of 80 caller
    • 20-name and number scroll style Directory
    • On-hook dialing – lets you dial and listen without picking up the handset
    • Compatible with Centrex, PBX or standard telephone service
    • CLASS and Voltage Message Waiting indication
    • Programmable Feature On and Off keys with indication
    • Adjustable receiver volume
    • English/French/Spanish prompts
    • Call timer
    • Desk or wall mount
    • Hearing aid compatible
    • Item Number: A1265-0000-10-05

    - http://telea2z.com/aastra-m9116-anal...-charcoal.html


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
All times are GMT. The time now is 10:00 PM.
Powered by vBulletin® Version 4.2.2
Copyright © 2018 vBulletin Solutions, Inc. All rights reserved.